Cotton Row * Full size plans

Description

Cotton Row is recreational rowing boat. She has a 19′ 8″ OAL with a waterline length of 18′ 10″ at 200 lbs displacement. As you can see in the photos Cotton Row has a small varnished wineglass transom.

While the basic boat is easy to build, the transom will require some woodworking skills. There are full sized patterns included that will give you the outline of the transom you will still have a lot of fitting to do as you build the frame.

Cotton Row was designed to be used with the sliding seat unit shown (plans not included)  but it could be set up for fixed seat rowing too.

Details on the specific boat designs are found a http://www.kudzucraft.com/designs/index.php

Full sized plans make the boat building experience much less stressful and much easier. With my plans there is no lofting required (laying out and drawing the frames). You simply cut out the individual pieces from the plans, glue them on the plywood, and cut to the lines.

My boats are designed using the latest in marine software. The plans are drawn using CAD software, and then plotted on a large format plotter to ensure accuracy.

Included is our detailed assembly manual with over 100 pages and approximately 100 images and illustrations which walk you through your build. If you get stumped you can get help from other builders in my forum. And of course I am active there too.

The plans are license to build one boat. If you wish to build more than one please see 2nd boat fee item for more details

Tangerine has enough of a ‘V’ in the bow that it should make for good tracking and well suited for use on a larger bodies of water.

Details on the specific boat designs are found a http://www.kudzucraft.com/designs/index.php

Full sized plans make the boat building experience much less stressful and much easier. With my plans there is no lofting required (laying out and drawing the frames). You simply cut out the individual pieces from the plans, glue them on the plywood, and cut to the lines.

My boats are designed using the latest in marine software. The plans are drawn using CAD software, and then plotted on a large format plotter to ensure accuracy.

Included is our detailed assembly manual with over 100 pages and approximately 100 images and illustrations which walk you through your build. If you get stumped you can get help from other builders in my forum. And of course I am active there too.

The plans are license to build one boat. If you wish to build more than one please see 2nd boat fee item for more details